banner.jpg

SHOP

  • Plaster - 20KG

    Plaster - 20KG

PH ECO Plaster products made from Diatomaceous Earth are 100% natural and free of chemicals. Our wall coating eliminates Volatile Organic Compound (VOC) pollutants, is odourless, anti-mould, anti-bacterial and flame retardant and offers excellent sound and heat insulation. Negative ion and far infra-red ray emission are additional benefits. Competitively priced against normal paint types, it is an economical option and is available in many colour choices.

PH ECO Plaster is Green Label certified, tested safe by PSB and approved by the Singapore Green Building Council for green construction projects.

How to use:

  1. Add water in the ratio of water to paint should be 1:1. (The ratio may differ depending on the work required, but the general rule is to always add water first.)
  2. Coating thickness: 1.5-2mm (for best results, apply 2 coats around 3-4mm)
  3. Drying time: 2-4 hours (depending on room temperature)
  4. Surface area coverage: 1kg per square meter of 3mm thickness

 

Application instructions:

Ensure wall is clean and dry. Mix well until its appearance resembles a paste form. Allow plaster to set for 10 minutes before use.

 

For repairs of wall cracks or lines:

Make sure wall is dry, clean and dust-free. Using a mesh cloth to cover the crack, apply the plaster over as needed for best results. 

We also provide services for wall plastering in Singapore.

  • $400.00
  • $340.00

Product Details
  • Shelf life: 2 years (unopened with storage at 5-30 degrees Celsius)
  • Colour: Base colour is white (Colours can be tinted to requirement)
  • Ingredients: Diatomaceous Earth (main), sierozem powder, water, natural binders. 
User Guide Group
  1. Add water in the ratio of water to paint should be 1:1. (The ratio may differ depending on the work required, but the general rule is to always add water first.)
  2. Coating thickness: 1.5-2mm (for best results, apply 2 coats around 3-4mm)
  3. Drying time: 2-4 hours (depending on room temperature)
  4. Surface area coverage: 1kg per square meter of 3mm thickness
  • Application instructions:
  • Ensure wall is clean and dry. Mix well until its appearance resembles a paste form. Allow plaster to set for 10 minutes before use.
  • For repairs of wall cracks or lines:
  • Make sure wall is dry, clean and dust-free. Using a mesh cloth to cover the crack, apply the plaster over as needed for best results.